High Mast Lighting Bid Scope: Who Supplies the Pole, Lowering System and Foundation?

Explore the page details below, or contact Jieyao Lighting to discuss your outdoor lighting requirements.

Discuss Your Project
High Mast Lighting Bid Scope: Who Supplies the Pole, Lowering System and Foundation?
Home > Blog

High Mast Lighting Bid Scope: Who Supplies the Pole, Lowering System and Foundation?

Before comparing high mast lighting bids, assign every supplied item to a bid line and name who installs and accepts it. Start with the pole and anchors, the lighting assembly, and the foundation. A supplier may price several of these together, but the bid schedule should still show where each item is carried.

What a public highway specification puts in each package

The Texas Department of Transportation’s Highway Illumination Manual groups the pole and anchor bolts under Item 613 and the concrete foundation under Item 416. Item 614 describes the mechanical and electrical assembly, including the ring, hoisting equipment and luminaires. For its LED high mast assembly, the manual identifies Special Specification 6156 as the replacement for Item 614, covering the associated mechanical and electrical parts as well. Use the actual bid documents to determine which provision applies to your project.

The practical point is the anchor bolts. They sit in the foundation, yet this public example carries them under the pole item. A buyer who assumes every embedded component is in the civil price can overlook that supply obligation. TxDOT Highway Illumination Manual, Chapter 5, Section 3.

Work through a scope conflict before comparing prices

In a hypothetical tender, the mast bidder excludes the anchor cage and the civil bidder includes concrete and reinforcement. The civil offer says nothing about anchor supply. The buyer should mark the anchors as unresolved and obtain a written inclusion from one bidder. Then ask who delivers the setting template, who sets the anchors, and which drawing the civil team uses to verify the interface.

  • Pole package
  • Record the shaft, headframe or arm interface, base plate, anchors and setting template. Identify the drawing and reaction package the civil designer will receive.
  • Lighting assembly
  • Record the luminaires and electrical equipment. For a lowering configuration, list the ring, hoist, drive and related controls individually. Confirm who supplies each component and who performs the agreed functional checks.
  • Foundation and site work
  • Record the foundation design responsibility, excavation, reinforcement, concrete, anchor setting and site connections. Confirm which party signs off the civil interface before erection.

Use one row per item in the bid comparison. Record the bidder’s offer reference, inclusion or exclusion, supply owner, installation owner and required handover record. Resolve any blank owner or double allocation in writing before comparing the totals.

Example bid comparison entry

  • Line item
  • Anchor bolts and setting template. Record each separately if the bidders price them separately.
  • Offer A, pole package
  • Anchor cage excluded. Template scope requires clarification.
  • Offer B, civil package
  • Concrete and reinforcement included. Anchor supply and template delivery are unspecified.
  • Close the clarification
  • Obtain a revised offer identifying the supply owner and installer. Record the approved drawing reference and the party responsible for checking the installed anchor arrangement before erection release.

Request a scope breakdown for the configuration you need

Send Jieyao Lighting the site, lighting application, planned mast height and preferred fixed or lowering arrangement. Include the tender scope schedule so each supply and installation item can be reviewed. Ask the supplier to mark the scope against your tender schedule and identify the drawings available for review. The fixed and lowering high mast product page is the configuration starting point. Use the high mast specification guide to prepare the design inputs.

Send the tender scope for a project review.

Sources reviewed 4 November 2026. The public highway example describes its procurement arrangement. The bid comparison example is hypothetical.

Contact Us

Get a custom lighting solution and quotation for your project.
Jieyao Lighting Yangzhou Jieyao Lighting Equipment Co., Ltd. manufactures outdoor lighting and steel poles in Guoji Town Industrial Park, Gaoyou City, Yangzhou, Jiangsu, China. The company reports a 10,000 m² factory site, more than 60 employees including more than 10 technical personnel, and more than 100 production and testing machines. The present company name dates from 2017; Jieyao Poles’ published history traces the team’s manufacturing lineage to 2006. The stated 15 years of experience refers to the team. The company reports exports to more than 60 countries.

Do you have any questions or requests?

Email: jay@jieyaolighting.com
Tel: +86 13815843784
WhatsApp: +86 13815843784
Contact
Copyright © 2026 Yangzhou Jieyao Lighting Equipment Co., Ltd. All rights reserved
×
Send Your Inquiry Today
We use cookie to improve your online experience. By continuing to browse this website, you agree to our use of cookie.

Cookies

WhatsApp avatar

Click to Chat.

Im online now.

Hey, I'm Xu Jie from Jieyao Lighting. What can I do for you? Welcome to contact me, WhatsApp: +86 13815843784

WhatsApp Us

WhatsApp us