For a street light pole access door or handhole cover replacement, identify the installed pole and its closure detail first. Keep the opening size, cover outline and fixing dimensions as separate records. Add the pole identity, shaft shape, finish and hardware scope so the supplier can identify a matching part or review a documented substitute.

Street light pole access cover — application illustration.
Record the asset number, pole manufacturer, model or type mark and available as-built drawing. Photograph the closed detail and any existing part marking where they can be recorded through the owner’s safe inspection process. Include the pole’s shape and local shaft size. For a round or tapered shaft, ask the supplier how its proposed cover contour corresponds to that location.
Acuity Brands’ aluminum-pole cover replacement document asks buyers to use the appropriate drawing and ordering nomenclature, including finish. Where visual identification is insufficient, it directs the order review back to the pole vendor. Its nomenclature includes cover identification and a vendor code. This provides a documented reason to recover the original pole record before ordering by appearance.
Acuity Brands aluminum-pole handhole cover replacement procedure: https://www.acuitybrands.com/-/media/abl/acuitybrands/files/resources/pole-resources/hand-hole-cover_aluminum.pdf
A description such as “same-size handhole cover” leaves these references unclear. The supplier should identify what its named size refers to and return the drawing used to select the part. Keep a nominal catalogue size alongside the measured dimensions so it cannot replace them during the order review.
In a hypothetical maintenance order, the cover is missing and the owner has only a photograph of the opening. The procurement team can supply the asset identity and the existing drawing, then ask the responsible maintenance team for the outstanding interface record. It should mark the cover outline and retaining hardware as unresolved until the original detail is identified or a substitute is reviewed.
If the old cover is still available, include it in the supplier’s identification review. A traced outline can add information, but the record still needs contour and retention details. Ask the supplier to confirm the complete closure assembly and the pole types to which its offer applies.
Hapco’s reinforced-handhole description specifies a shaped cover attached with screws and a contour following the shaft. Its unreinforced-handhole description uses a different fastening description. These manufacturer-specific details illustrate why a similar-looking cover or opening needs an exact closure review.
Hapco reinforced handholes: https://www.hapco.com/pole-accessories/reinforced-handholes/
Hapco unreinforced handholes: https://www.hapco.com/pole-accessories/unreinforced-handholes/
Ask whether the offer includes screws, retaining parts, hinges, locks or other required hardware. State the material and finish requirements from the existing specification. Where sealing or electrical bonding provisions apply, have the supplier identify the corresponding parts and drawing requirements. The complete installed detail and project acceptance requirements determine the evidence needed for those functions.
The wider access-door and internal cable-routing guide explains how the opening and equipment space are coordinated. Changes to the opening, frame or pole wall should be referred to the responsible designer through the owner’s approved process.
Send Jieyao Lighting the asset identity, labelled interface sketch, relevant photographs, available drawing and required finish. Ask for the proposed cover reference, applicable pole configuration, included hardware and any outstanding dimensions. For broader street light pole requirements, identify whether the request concerns a replacement closure or a new pole assembly so the supply scope is clear.
Before releasing the order, record the drawing revision and written compatibility disposition. On receipt, match the part identification, supplied hardware and finish to that record. The owner’s qualified maintenance team should complete installation and the agreed closure checks. Use the pole spare-parts guide to retain the asset-to-spare record.
Request a pole closure identification review.
Sources reviewed 4 November 2026. The maintenance-order example is hypothetical. The application image is generated.
Contact Us
Get a custom lighting solution and quotation for your project.
Yangzhou Jieyao Lighting Equipment Co., Ltd. manufactures outdoor lighting and steel poles in Guoji Town Industrial Park, Gaoyou City, Yangzhou, Jiangsu, China. The company reports a 10,000 m² factory site, more than 60 employees including more than 10 technical personnel, and more than 100 production and testing machines. The present company name dates from 2017; Jieyao Poles’ published history traces the team’s manufacturing lineage to 2006. The stated 15 years of experience refers to the team. The company reports exports to more than 60 countries. Do you have any questions or requests?
Email: jay@jieyaolighting.com