Yes. Our light rings can be customized with brackets to accommodate CCTV cameras or other security sensing devices.

EPA refers to the Effective Projected Area of the pole and fixtures under wind pressure. It is a critical parameter for calculating structural safety.

Technically yes, but due to high power consumption, very large solar arrays and battery banks are required. We typically recommend grid-tied or hybrid systems.

We use high-quality stainless steel or plastic-coated wire ropes and recommend regular greasing during annual inspections.

Yes. With intelligent control systems, you can remotely adjust brightness and scheduling to maximize energy savings.

We perform Non-Destructive Testing (NDT), such as ultrasonic testing, to ensure all critical load-bearing welds are free of cracks or porosity.

Standard configurations take 15-20 days. Large orders requiring structural calculations and custom production typically take 30-45 days.

It depends on the environment. High-lumen LED street lights are recommended for main roads; Solar street lights are ideal for remote or sun-rich areas; Smart poles are best for commercial zones or smart city planning.

Yes. We provide specialized batteries for extreme climates, including heating films for cold regions and heat-resistant lithium cells for tropical environments.

To give you a straight answer: Yes, the upfront cost of a Solar LED Street Light is higher than a traditional AC LED light. However, if you look at the "Total Cost of Ownership," solar often wins by a landslide.

We use reinforced cartons and wooden pallets to prevent damage during long-distance transit. For large projects, we recommend FCL (Full Container Load) sea freight to minimize shipping costs.

Our solar street lights carry CE, RoHS, IP66, IK10, and ISO 9001 certifications, meeting the standards for government and commercial projects worldwide.

Yes. We can customize power output, battery capacity, logo branding, and even industrial design based on your project requirements.

In dusty or low-rainfall areas, we recommend cleaning every 6 months. Heavy dust accumulation can reduce charging efficiency by over 20%.